Fehler in der Steuerungskonfiguration für den USB-SPI-Schnittstelle
17.09.2014, 13:43
Hello,
I found a small error in the file slabvcp.inf. After its improved software and the USB-SPI had already begun to work!
Make sure that the line 39 and 52 look like this:
% USB \ VID_18EF & PID_E027.DeviceDesc% = silabser.Dev, USB \ VID_18EF & PID_E027
I wish you success in use!
Hallo Freunde ELV,
Ich fand einen kleinen Fehler in der Datei slabvcp.inf. Nach seiner verbesserten Software und dem USB-SPI bereits begonnen hatte, an die Arbeit!
Stellen Sie sicher, dass die Linie 39 und 52 wie folgt aussehen:
% USB \ VID_18EF & PID_E027.DeviceDesc% = silabser.Dev, USB \ VID_18EF & PID_E027
Ich wünsche Ihnen viel Erfolg im Einsatz!
Vielen Dank Google Übersetzer!
Andrzej Majewski :D
a.majewski@dsc.com.pl
I found a small error in the file slabvcp.inf. After its improved software and the USB-SPI had already begun to work!
Make sure that the line 39 and 52 look like this:
% USB \ VID_18EF & PID_E027.DeviceDesc% = silabser.Dev, USB \ VID_18EF & PID_E027
I wish you success in use!
Hallo Freunde ELV,
Ich fand einen kleinen Fehler in der Datei slabvcp.inf. Nach seiner verbesserten Software und dem USB-SPI bereits begonnen hatte, an die Arbeit!
Stellen Sie sicher, dass die Linie 39 und 52 wie folgt aussehen:
% USB \ VID_18EF & PID_E027.DeviceDesc% = silabser.Dev, USB \ VID_18EF & PID_E027
Ich wünsche Ihnen viel Erfolg im Einsatz!
Vielen Dank Google Übersetzer!
Andrzej Majewski :D
a.majewski@dsc.com.pl